LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Blazer 2D Utility, 4WD, Automatic, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Stationary Window System) >> Repair Instructions >> Window Replacement - Liftgate >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Safari and 2005 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
  2. Fig 1: Locating Rear Window Defogger Electrical Connector
    GM401856Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the rear window defogger on the liftgate window.
  4. Close liftgate window.
  5. Install the back window wiper arm to the liftgate. Refer to Wiper Arm Replacement - Rear in Wipers/Washer Systems.
  6. Connect the washer hose to the liftgate.
  7. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.