LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Avalanche 2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Frame And Underbody) >> Repair Instructions >> Engine Protection Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Sierra and 2005 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the shield to the vehicle. 15 Series is shown, 25 Series is similar.
    2. Fig 1: View Of Engine Protection Shield
    GM349061Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the shield to frame bolts.

    Tighten:  Tighten the bolts to 20 N.m (15 lb ft).

scientia non olet · About LEMON Manuals