Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Sierra and 2005 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Battery Tray & Bolts At Battery Tray Support

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the battery tray.
Install the battery tray bolts (1) to the battery tray support.
Tighten: Tighten the bolts to 9 N.m (80 lb in).

Fig 2: View Of Battery Tray & Bolts At Fender Inner Panel

Courtesy of GENERAL MOTORS CORP.

Install the battery tray bolts (1) to the fender inner panel.
Tighten: Tighten the bolts to 9 N.m (80 lb in).

Fig 3: View Of Battery Tray Reinforcement & Bolts

Courtesy of GENERAL MOTORS CORP.

Install the battery tray bolts (2) to the battery tray reinforcement.
Tighten: Tighten the bolts to 9 N.m (80 lb in).
Install the battery. Refer to Battery Replacement .