LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Avalanche 2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Seat Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Sierra and 2005 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Seat Adjuster Track Bracket
    GM833594Courtesy of GENERAL MOTORS CORP.
  1. Remove the passenger or driver's seat from the vehicle. Refer to Seat Replacement - Front Bucket in Seats.
  2. Disconnect the electrical connector from the seat position sensor.
    3. CAUTION: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
  3. Drill out the rivets that retain the seat position sensor (1) to the seat adjuster track bracket.
  4. Remove the seat position sensor from the seat adjuster track bracket.
scientia non olet · About LEMON Manuals