LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Avalanche 2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Controls - 4.3L (Introduction)) >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Sierra and 2005 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Feed Line, EVAP Purge Line & FLVV Line
    GM1306291Courtesy of GENERAL MOTORS CORP.
  1. Remove the caps from the fuel feed/return, and EVAP lines.
  2. Install and connect the fuel feed (1) line to the sending unit and retaining clips.
  3. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals