Installation Procedure

WARNING: This page is about a different car, the 2005 GMC Sierra and 2005 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Tool Storage Compartment (PRO)

Courtesy of GENERAL MOTORS CORP.

Install the tool storage compartment to the vehicle.
Install the nuts that retain the tool storage compartment to the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the nuts that retain the tool storage compartment to the mounting brackets.
Tighten: Tighten the nuts to 10 N.m (88 lb in).
Lower the rear seat.