Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Sierra and 2005 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Tool Storage Compartment Lock (PRO)

Courtesy of GENERAL MOTORS CORP.

CAUTION: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.

Raise the rear seat.
Remove the rivets retaining the lock assembly to the tool storage compartment.
Remove the lock assembly from the vehicle.

Installation Procedure

Fig 2: Removing Tool Storage Compartment Lock (PRO)

Courtesy of GENERAL MOTORS CORP.

Install the lock assembly to the vehicle.
Install the rivets retaining the lock assembly to the tool storage compartment.
Lower the rear seat.