Installation Procedure
WARNING: This page is about a different car, the 2005 GMC Sierra and 2005 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- With the aid of an assistant, install the headliner to the vehicle.
- Install the rear window into the vehicle, if removed. Refer to Rear Window Replacement (Pickup) in Stationary Windows.
- Install the assist handles, if equipped. Refer to Assist Handle Replacement - Front .
- Install the interior dome lamp. Refer to Dome Lamp Replacement in Lighting Systems.
- Install the rear coat hook, if equipped. Refer to Coat Hook Replacement .
- Install both front sunshades. Refer to Sunshade Replacement .
- Install the DVD player, if equipped. Refer to DVD Player Replacement (2nd Row) in Entertainment.
- Install the overhead console, if equipped. Refer to Console Replacement - Overhead .
- Install the rear quarter trim panels, if needed. Refer to Trim Panel Replacement - Rear Quarter (Regular Cab) or Trim Panel Replacement - Rear Quarter (Extended Cab) or Trim Panel Replacement - Rear Quarter (Crew Cab) .
- Connect the headliner electrical connector to the junction block located next to the clutch or brake pedal.
- Connect the electrical connectors to the drivers side accessory housing.
- Install the hinge pillar trim. Refer to Trim Panel Replacement - Hinge Pillar .
- Install the I/P top trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gages, and Console.
IMPORTANT:
Ensure that all of the wire harness retainers in the I/P and the windshield pillar are all pressed into place in order to prevent rattling during driving.