LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Astro Van Cargo, RWD >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - Off Vehicle >> Assembly Procedure

Assembly Procedure

    Fig 1: View Of Power Steering Pump Control Valve Assembly
    GM580317Courtesy of GENERAL MOTORS CORP.
  1. Install the flow control spring (5), if removed from the pump housing (1).
  2. Lubricate the new O-ring seal (3) with power steering fluid.
  3. Install the O-ring seal (3) onto the connector and fitting assembly (2).
  4. Install the control valve assembly (4).
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the connector and fitting assembly (2).

    Tighten:  Tighten the connector and fitting assembly to 75 N.m (55 lb ft).

scientia non olet · About LEMON Manuals