LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2005 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Shoulder Belt Guide Adjuster Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: Locating Guide Adjuster Bracket Retaining Bolts
    GM162109Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the guide adjuster bracket to the pillar.
  2. Install the 2 guide adjuster bracket retaining bolts to the pillar.

    Tighten:  Tighten the guide adjuster bracket retaining bolts to the pillar to 20 N.m (15 lb ft).

  3. Install the left front side door lock pillar garnish molding. Refer to Garnish Molding Replacement - LF Lock Pillar in Interior Trim.
  4. Install the right front side door lock pillar garnish molding. Refer to Garnish Molding Replacement - RF Lock Pillar in Interior Trim.
  5. Install the shoulder belt retaining bolt to the guide adjuster bracket.

    Tighten:  Tighten the front seat shoulder belt retaining bolt to the guide adjuster bracket to 53 N.m (39 lb ft).

  6. Install the cover for the front seat shoulder belt.
scientia non olet · About LEMON Manuals