LEMON Manuals
: Even more car manuals for everyone
Home
>>
Chevrolet
>>
2004
>>
Venture LS, Van Passenger Extended, FWD
>>
Repair and Diagnosis
>>
Engine Performance
>>
System
>>
Engine Control System - 3.4L (Introduction)
>>
Repair Instructions
>>
Knock Sensor (KS) Replacement
>>
Removal Procedure
Removal Procedure
Fig 1: Locating Knock Sensor
Courtesy of GENERAL MOTORS CORP.
Turn OFF the ignition.
Raise the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.
Disconnect the wiring harness connector from the knock sensor (KS).
Remove the KS from the engine block.