LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Steering Column Trim Covers Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Trim Cover Protector
    GM324816Courtesy of GENERAL MOTORS CORP.
  1. If necessary, install the trim cover protector (1) to the lower trim cover (2).
  2. Install the shift lever. Refer to Shift Lever Replacement .
    3. Fig 2: View Of Upper Trim Cover
    GM324810Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the upper trim cover (2) and secure by using the TORX® head screw (1).

    Tighten:  Tighten the screw to 1.5 N.m (13 lb in).

    4. Fig 3: View Of Lower Trim Cover
    GM324805Courtesy of GENERAL MOTORS CORP.
  4. Install the lower trim cover (1) and secure by using 2 pan head tapping screws (2).

    Tighten:  Tighten the screws to 3.5 N.m (31 lb in).

  5. Install the tilt lever assembly. Refer to Tilt Lever Replacement .
  6. Install the steering wheel onto the column. Refer to Steering Wheel Replacement .
  7. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
scientia non olet · About LEMON Manuals