LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Water Pump Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Water Pump
    GM30996Courtesy of GENERAL MOTORS CORP.
  1. Install the water pump gasket.
  2. Install the water pump.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the water pump bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

    4. Fig 2: View Of Water Pump Pulley
    GM30978Courtesy of GENERAL MOTORS CORP.
  4. Install the water pump pulley. Loosely install the mounting bolts.
  5. Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical - 3.4L.
  6. Install the water pump pulley bolts.

    Tighten:  Tighten the bolts to 25 N.m (18 lb in).

    7. Fig 3: View Of Drive Belt Guard
    GM368805Courtesy of GENERAL MOTORS CORP.
  7. Install the drive belt guard.
  8. Fill the cooling system. Refer to Draining and Filling Cooling System .
  9. Inspect the cooling system for leaks.
scientia non olet · About LEMON Manuals