LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Quarter Window Replacement (With A20) >> Removal Procedure

Removal Procedure

    IMPORTANT: Before removing a stationary window, apply a layer of masking tape around the perimeter of the painted surfaces and inner trim of the window.
  1. Remove the body side rear upper finish panel. Refer to Trim Panel Replacement - Body Lock Pillar Upper in Interior Trim.
  2. Remove the rear corner upper finish panel. Refer to Finish Panel Replacement - Upper Rear Trim in Interior Trim.
  3. Open the bodyside window to the full open position.
    4. Fig 1: Locating Quarter Window Components
    GM1232904Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connector (4) from the power window actuator (5).
  5. Remove the bodyside window hinge nuts (2).
  6. Remove the bodyside window (1) from the opening.
  7. Remove the screw (3) from the window (1).
scientia non olet · About LEMON Manuals