LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Back Heater Element Replacement - Front >> Installation Procedure

Installation Procedure

  1. Install the heater element.
    2. Fig 1: Locating Seat Back Cover Components
    GM317161Courtesy of GENERAL MOTORS CORP.
  2. Push down on the seat back cover (1).
  3. Install the retainer rings (2) to the seat back cover.
  4. Secure the seat back cover to the foam pad with the hook and loop retainers.
  5. Install the seat back to the seat cushion.
    6. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Install the front seat recliner bolts.

    Tighten:  Tighten the bolts to 48 N.m (35 lb ft).

    7. Fig 2: Locating J Retainer
    GM317158Courtesy of GENERAL MOTORS CORP.
  7. Install the J retainer (1) to the bottom edge of the seat back cover.
  8. Secure the seat back recliner covers in place.
  9. Install the recliner handle and cap. Refer to Seat Back Recliner Handle Replacement - Front .
  10. Install the finish covers. Refer to Seat Adjuster Track Cover Replacement - Front .
  11. Install the map pocket net. Refer to Map Pocket Net Replacement - Front Seat .
  12. Install the front seat. Refer to Seat Replacement - Bucket .
scientia non olet · About LEMON Manuals