LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.4L (Introduction) >> Repair Instructions >> Mass Air Flow (MAF) Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Turn OFF the ignition.
    2. Fig 1: View Of Mass Air Flow Sensor
    GM15974Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the intake air temperature (IAT) sensor.
  3. Disconnect the mass air flow (MAF) sensor (1).
  4. Remove the air inlet duct from the MAF sensor and the throttle body.
  5. Remove the MAF sensor from the air filter housing.
scientia non olet · About LEMON Manuals