LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Hanger Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating Catalytic Converter Hanger Bolts
    GM669875Courtesy of GENERAL MOTORS CORP.
  1. Install the catalytic converter hanger.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the catalytic converter hanger bolts.

    Tighten:  Tighten the catalytic converter hanger bolts to 35 N.m (26 lb ft).

  3. Install the catalytic converter hanger insulators to the catalytic converter.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals