LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Negative Cable Disconnect/Connect Procedure >> Installation Procedure

Installation Procedure

  1. Install the battery ground (negative) cable and bolt to the battery.

    Tighten:  Tighten the battery terminal bolt to 16 N.m (12 lb ft).

    Fig 1: Locating Battery Cable Connections
    GM368800Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
  2. Reprogram the radio presets. Refer toRadio Setup in Entertainment.
  3. Re-initialize the power sliding doors. Refer toPower Sliding Door (PSD) Re-Initialization in Doors.