LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Tracker RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case) >> Repair Instructions >> Transfer Case Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Support the transfer case and the transmission with a suitable hydraulic jack.
  3. Remove the 2 bolts (1).
  4. Separate the transfer case skid plate from the transfer case crossmember.
  5. Remove the 10 bolts (3) and the transfer case crossmember from the undercarriage.
  6. Remove the 2 bolt and the transfer case rear mount (2) from the transfer case.
  7. Inspect the transfer case rear mount for excessive wear or damage. Replace as necessary.
scientia non olet · About LEMON Manuals