LEMON Manuals
: Even more car manuals for everyone
Home
>>
Chevrolet
>>
2004
>>
Tracker RWD
>>
Repair and Diagnosis
>>
Engine Performance
>>
System
>>
Engine Control System - 2.5L (LE8) (Introduction)
>>
Repair Instructions
>>
Ignition Coil(s) Replacement
>>
Removal Procedure
Removal Procedure
Remove the two fasteners and the ignition coil cover (2) from the valve cover (1).
Disconnect the ignition coil electrical connector.
Fig 1: View Of Ignition Coil Cover Fasteners & Valve Cover
Courtesy of GENERAL MOTORS CORP.
Remove the ignition coil retaining bolt (1).
Pull up in order to remove the ignition coil (2).
Fig 2: View Of Ignition Coil & Retaining Bolt
Courtesy of GENERAL MOTORS CORP.