LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Tracker RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.5L (LE8) (Introduction) >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Pipe Replacement >> Removal Procedure

Removal Procedure

  1. Allow the engine to cool down.
  2. Remove the two fasteners attaching the EGR pipe (5) to the underside of the intake collector (1).
  3. Remove the two fasteners attaching the EGR pipe (5) to the bank 2 exhaust manifold (4).
  4. Remove the upper gasket (2) and the lower gasket (3).
  5. Remove the fastener to the EGR pipe bracket.
  6. Remove the EGR pipe (5).
  7. Clean any remaining gasket material from both contact surfaces.
    8. Fig 1: View Of EGR Pipe, Intake Collector, Bank 2 Exhaust Manifold, Upper & Lower Gasket
    GM739065Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals