LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Tracker RWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Starter Motor Replacement >> Removal Procedure

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Disconnect the starter solenoid electrical connector.
  3. Remove the retaining nut and positive battery cable from the starter solenoid.
  4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  5. Remove the 2 bolts (1) from the starting motor.
  6. Lower the vehicle.
  7. Remove the starting motor through the front area of the engine compartment between the generator and the inner fender.
    8. Fig 1: View Of Starter Motor Bolts
    GM713073Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals