LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Tracker RWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Accessory Power Socket >> Repair Instructions >> Accessory Power Receptacle Replacement - 12 Volt >> Installation Procedure

Installation Procedure

  1. Install the bezel (2) to the rear floor console, if removed.
  2. Install the 12-volt power supply receptacle (1) to the bezel.
    3. Fig 1: View Of Power Supply Bezel
    GM927691Courtesy of GENERAL MOTORS CORP.
  3. Install the retainer nut (2) to the power supply receptacle (1).
    4. Fig 2: View Of Power Supply Receptacle
    GM927689Courtesy of GENERAL MOTORS CORP.
  4. Connect the electrical connectors (1) to the 12-volt power supply.
    5. Fig 3: View Of 12-Volt Power Supply Electrical Connectors
    GM927688Courtesy of GENERAL MOTORS CORP.
  5. Install the rear floor console. Refer to Console Replacement - Rear Floor in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals