LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Tracker RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Back Replacement - Front >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the seat back cushion (1) to the front seat. Secure the cushion to each seat adjuster (3) with the 2 mounting bolts (2).

    Tighten:  Tighten the front seat back cushion mounting bolts to 35 N.m (25 lb ft).

    2. Fig 1: View Of Seat Recliner & Seat Belt Buckle
    GM479521Courtesy of GENERAL MOTORS CORP.
  2. Secure the J-retainer (2) on the bottom of the seat back cushion (1) which secures the cushion around the seat adjuster lateral rod (3).
  3. Install the front seat outer adjuster finish cover. Refer to Seat Adjuster Track Cover Replacement - Front Outer .
  4. Install the front seat inner adjuster finish cover. Refer to Seat Adjuster Track Cover Replacement - Front Inner .
  5. Install the front seat. Refer to Seat Replacement - Front Bucket .
    6. Fig 2: View Of Seat Back Cushion, Adjuster Lateral Rod & J-Retainer
    GM489097Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals