LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Tracker RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Lumbar Support Knob Replacement >> Installation Procedure

Installation Procedure

    IMPORTANT: The splines on the lumbar support knob must be properly aligned to the lumbar control shaft for a proper fit.
  1. Install the knob to the lumbar control shaft.
  2. Install the lumbar support knob by pressing into place until fully seated
    3. Fig 1: View Of Lumbar Support Knob
    GM626943Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals