Installation Procedure

Install the radio bracket (4) to the radio (3), if removed. Secure the bracket with the 4 screws.

Fig 1: View Of Radio Electrical Connector & Antenna Lead

Courtesy of GENERAL MOTORS CORP.

Connect the antenna lead (2) and electrical connector (1) to the radio (3).
Install the radio to the instrument panel. Secure the radio with the 4 screws (1).

Fig 2: View Of Radio & Center Console

Courtesy of GENERAL MOTORS CORP.

Install the IP center trim plate. Refer to Trim Panel Replacement - Instrument Panel (I/P) Center in Instrument Panel, Gages and Console.