LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Tracker 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Wheel Speed Sensor Ring Replacement - Front >> Installation Procedure

Installation Procedure

  1. Using J 39245  , press the ABS reluctor ring (2) onto the wheel hub. See Special Tools and Equipment .
  2. Install the Front Wheel Hub. Refer to Wheel Hub, Bearing, and Seal Replacement (4WD) or Wheel Hub, Bearing, and Seal Replacement (2WD) in Front Suspension.
  3. Perform Diagnostic System Check - ABS .
    4. Fig 1: Installing ABS Reluctor Ring
    GM589958Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals