LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Tracker 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Cable Replacement >> Removal Procedure

Removal Procedure

  1. Remove the cruise control module cover (1).
    2. Fig 1: View Of Cruise Control Module Cover
    GM488523Courtesy of GENERAL MOTORS CORP.
  2. Loosen the cruise control servo cable locknut (5).
  3. Remove the cruise control servo cable (3) from the cruise control servo assembly (1).
    4. Fig 2: View Of Cruise Control Servo Cable To Servo Assembly
    GM488533Courtesy of GENERAL MOTORS CORP.
  4. Remove the cruise control servo cable (3) from the cruise control servo cable retainers (5).
    5. Fig 3: View Of Cruise Control Servo Cable And Retainers
    GM488527Courtesy of GENERAL MOTORS CORP.
  5. Remove the cruise control servo cable from the accelerator pedal (1).
  6. Unclip the retainer (2) and grommet (4) which secure the cruise control servo cable from underneath the instrument panel.
  7. Remove the cruise control servo cable from the vehicle.
    8. Fig 4: View Of Cruise Control Servo Cable To Accelerator Pedal
    GM488525Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals