LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Silverado 2500, 2D Pickup, LQ4/KL8, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.0L - Alternative Fuels (Introduction) >> Repair Instructions >> Fuel Tank Cover Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Fuel Tank And Fuel Tank Cover
    GM757009Courtesy of GENERAL MOTORS CORP.
  1. Install the tank cover (2).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Loosely install all the tank cover bolts.

    Tighten:  Tighten the bolts to 8 N.m (71 lb in).

  3. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure (Single Battery) Battery Negative Cable Disconnect/Connect Procedure (Auxiliary Battery) in Engine Electrical in the C/K Pickup service manual.
scientia non olet · About LEMON Manuals