LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Silverado 2500, 2D Pickup, LQ4/KL8, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.0L - Alternative Fuels (Introduction) >> Repair Instructions >> Fuel Injector Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Injector Connectors
    GM757006Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Compressed Natural Gas (CNG) O-Ring Caution in Cautions and Notices.
  1. Install the fuel injector (5) into the fuel rail (3, 4) using a new O-ring. Lubricate the new O-ring with petroleum jelly.
  2. Install the fuel injector retainer clip.
  3. Lubricate the new injector tip O-ring with clean engine oil.
  4. Repeat steps 1, 2 and 3 for the remaining fuel injectors.
  5. Install the fuel rail assembly. Refer to Fuel Rail Assembly Replacement (KL6)  or Fuel Rail Assembly Replacement (KL8) .
scientia non olet · About LEMON Manuals