LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> External Pages >> Different car >> Section 704 (Wiper System And Washer System) >> Repair Instructions >> Wiper Transmission Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the wiper transmission into the vehicle.
  2. Connect the washer hose to the wiper transmission.
    3. Fig 1: Identifying Wiper Transmission Assembly
    GM1244682Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the wiper transmission fasteners.

    Tighten:  Tighten the wiper transmission fasteners to 6 N.m (53 lb in).

  4. Install the drive link onto the wiper motor crank arm with the J 39529. See Special Tools and Equipment .
  5. Install the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  6. Install the wiper arms. Refer to Wiper Arm Replacement .
  7. Close the hood.
scientia non olet · About LEMON Manuals