LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> External Pages >> Different car >> Section 704 (Wiper System And Washer System) >> Repair Instructions >> Washer Solvent Container Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the washer solvent container into the vehicle.
  2. Connect the washer solvent hose to the washer pump.
    3. Fig 1: View of Washer Solvent Container
    GM1244685Courtesy of GENERAL MOTORS CORP.
  3. Push down to seat the washer solvent container into the vehicle.
    4. Fig 2: Identifying Washer Solvent Container Fasteners
    GM1244677Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Install the washer solvent container fasteners.

    Tighten:  Tighten the fasteners to 10 N.m (88 lb in).

  5. Install the PCM. Refer to Powertrain Control Module (PCM) Replacement in Engine Controls - 4.8L, 5.3L, and 6.0L.
  6. Close the hood.
scientia non olet · About LEMON Manuals