Installation Procedure
WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
- Position the washer pump to the washer solvent container pressing in until fully seated.
- Connect the washer hose to the washer pump.
- Connect the washer pump electrical connector.
- Fill the washer solvent container with washer solvent.
- Install the PCM. Refer to Powertrain Control Module (PCM) Replacement in Engine Controls - 4.8L, 5.3L, and 6.0L.
- Close the hood.