Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Bulb

Courtesy of GENERAL MOTORS CORP.

Insert the bulb into the headlamp assembly.
Turn the bulb 1/4 clockwise to seat the bulb into the headlamp assembly.

Fig 2: View of Headlamp Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the headlamp electrical connectors to the bulb.

Fig 3: View of Headlamp Door Access Cover

Courtesy of GENERAL MOTORS CORP.

Install the headlamp door access cover to the vehicle.

Fig 4: View of Headlamp Door Access Cover Fastener

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the headlamp door access cover fastener.
Tighten: Tighten the headlamp door access cover fastener to 7-11 N.m (62-98 lb in).
Return wheels facing straight ahead.