Removal Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cycle The Folding Top To The Open Position

Courtesy of GENERAL MOTORS CORP.

Cycle the folding top open.
Stop the cycle before the folding top stowage compartment lid starts to close.
Place a protective covering on the rear upper garnish molding.

Fig 2: Identifying Body Rear Compartment Lid Fasteners

Courtesy of GENERAL MOTORS CORP.

Remove the body rear compartment lid fasteners.

Fig 3: View of Body Rear Compartment Lid Latches

Courtesy of GENERAL MOTORS CORP.

Unlatch the body rear compartment lid latches.

Fig 4: View of Body Rear Compartment Lid

Courtesy of GENERAL MOTORS CORP.

Remove the body rear compartment lid from the vehicle.
Disconnect the vehicle battery. Refer to BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE .

Fig 5: View of Control Module Clips

Courtesy of GENERAL MOTORS CORP.

Release the control module clips.

Fig 6: Identifying Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connectors.

Fig 7: View of Control Module

Courtesy of GENERAL MOTORS CORP.

Remove the control module from the vehicle.