Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Sunshade Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector (1).
Push the electrical connector and wiring above the headliner.

Fig 2: View of Sunshade Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the sunshade screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).