Installation Procedure
WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
- Install the strap and bolt to engine block.
Tighten: Tighten bolt to 50 N.m (37 lb ft).
- Lower the vehicle.
- Install the nut to retain strap to frame.
Tighten: Tighten nut to 25 N.m (18 lb ft).
- Close the hood.
NOTE:
Refer to FASTENER NOTICE
in Cautions and Notices.