LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> External Pages >> Different car >> Section 680 (Battery) >> Repair Instructions >> Battery Negative Cable Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Chevrolet SSR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the negative battery cable to vehicle.
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the nut to retain the negative battery cable to the right side frame rail.

    Tighten:  Tighten nut to 25 N.m (18 lb ft).

  3. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  4. Install the rear battery cover and nuts.

    Tighten:  Tighten nuts to 10 N.m (89 lb in).

  5. Lower the vehicle.
scientia non olet · About LEMON Manuals