LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> External Pages >> Different car >> Section 494 (Disc Brake System) >> Repair Instructions >> Disc Brake Splash Shield Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Brake Dust Caution in Cautions and Notices.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the hub and bearing assembly. Refer to Wheel Hub, Bearing, and Seal Replacement (RWD) or Wheel Hub, Bearing, and Seal Replacement (4WD) in Front Suspension.
  4. Remove the splash shield (6) (15 Series).
    5. Fig 1: Exploded View Of Disc Brake Components (15 Series)
    GM913491Courtesy of GENERAL MOTORS CORP.
  5. Remove the splash shield (6) (25 Series).
    6. Fig 2: Exploded View Of Disc Brake Components (25 Series)
    GM887991Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals