LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> External Pages >> Different car >> Section 260 (Battery) >> Repair Instructions >> Battery Negative Cable Disconnect/Connect Procedure >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to BATTERY DISCONNECT CAUTION in Cautions and Notices.

Important:  Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.

  1. Install the battery cable to the battery.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Tighten the negative cable bolt.

    Tighten 

    Tighten the bolt to 17 N.m (13 lb ft).

    Fig 1: Installing Battery Cable To Battery
    G02117899Courtesy of GENERAL MOTORS CORP.