LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 4.8L, 5.3L, & 6.0L (Introduction) >> Repair Instructions >> Accelerator Pedal Position (APP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View of Accelerator Pedal Position Sensor Harness Connector
    GM899725Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Handling Electronic Throttle Control Notice in Cautions and Notices.
  1. Remove the left instrument panel (IP) lower closeout insulator panel.
  2. Disconnect the accelerator pedal position (APP) sensor harness connector.
    Fig 2: Identifying APP Assembly
    GM742494Courtesy of GENERAL MOTORS CORP.

    Remove the accelerator pedal mounting bolts (1).

  3. Remove the APP assembly (2).
scientia non olet · About LEMON Manuals