LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Repair Instructions >> Park Brake Lever Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View of Park Brake Handle
    GM1270843Courtesy of GENERAL MOTORS CORP.
  1. Install the front park brake cable.
  2. Install the front park brake cable.
    3. Fig 2: Identifying Park Brake Handle Mounting Nuts
    GM1336383Courtesy of GENERAL MOTORS CORP.
  3. Position the park brake handle on the mounting studs.
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the mounting bolts.

    Tighten:  Tighten the mounting bolts to 25 N.m (18 lb ft).

    5. Fig 3: Identifying Park Brake Switch Electrical Connector
    GM1270841Courtesy of GENERAL MOTORS CORP.
  5. Install the electrical connector for the park brake switch.
  6. Enable the park brake cable automatic adjuster. Refer to Enabling the Park Brake Cable Automatic Adjuster .
  7. Install the center console. Refer to Console Replacement in Instrument Panel, Gages, and Console.
  8. Check operation of the park brake handle.
scientia non olet · About LEMON Manuals