Power Window Indexing Feature Operation

This feature is used to lower the driver and passenger power windows down approximately 9 mm when the door is opened. This is necessary to allow the top edge of the window to clear the window weather-strip. This feature will also raise the window to the fully seated position once the door is closed.

This feature is enabled in the down direction by a switched ground signal to the RDM from the door handle switch when it is lifted. The RDM will then supply power and ground to the appropriate window motor control circuits to lower the window.

This feature is enabled in the up direction by a switched ground signal to the RDM from the door jamb switch when the door is closed. The RDM will then supply power and ground to the appropriate window motor control circuits to raise the window.