Operational And Functional Checks

CAUTION: The following precautions must be observed to avoid damage to the seat belt system. If these precautions are not taken, the seat belt system may not provide proper restraint in the unlikely event of an accident and may result in personal injury.

Keep any sharp and potentially damaging objects away from the belts.
Avoid bending or damaging any portion of the buckle.
Do not bleach or dye the belt webbing (use only mild soap and water).
When installing the seat belt anchor bolts, start bolts by hand to prevent cross-threading.
Do not attempt any repairs on the retractor mechanisms or the covers. Replace defective assemblies with new ones.
Replace any belts that are cut or damaged in any way.
Do not install anything in the trim panel, or between the trim and the height adjuster and/or the turning loop that will obstruct the movement of the seat belt.

Inspect all seat belt anchor bolts and the screws in order to verify that they are secure.
Inspect the seat belt buckle. The buckle must lock and unlock easily.
After inserting the latch into the buckle, tug sharply on the belt. The buckle must remain locked.
Fully extend the shoulder belt portion to make sure that there is no twisting or tears in the belt.
Let the shoulder belt retract fully. The belt should retract easily.