LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Optra5 Base, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems >> Repair Instructions >> Blower Motor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Blower Motor And Components
    GM1308291Courtesy of GENERAL MOTORS CORP.
  1. Install the blower motor and the seal with the shock mount pads in the heater/air distributor case. Hold the blower motor in position.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws to secure the blower motor to the heater/air distributor case.

    Tighten:  Tighten the blower motor retaining screws to 1.2 N.m (11 lb in)  .

  3. Connect the blower motor electrical connector and resistor connector.
  4. Connect the negative battery cable.
  5. Confirm that the blower motor operates properly.
  6. Replace the glove box. Refer to Instrument Panel Storage Compartment Replacement in Instrument Panel, Gauges and Console.
scientia non olet · About LEMON Manuals