LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Optra Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Outer Belt Sealing Strip Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Outdoor Channel Molding Screw
    GM1308995Courtesy of GENERAL MOTORS CORP.
  1. Press the outside channel molding onto the door.
    2. NOTE: Refer to Fastener Notice .
  2. Install the outside channel molding screw.

    Tighten:  Tighten the outside channel molding screw to 1.3 N.m (12 lb in)  .

  3. Raise the window.
scientia non olet · About LEMON Manuals