LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Optra Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Hood Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Hood Hinge Bolts
    GM1309218Courtesy of GENERAL MOTORS CORP.
  1. With the aid of another technician, position the hood in the location marked during removal.
    2. NOTE: Refer to Fastener Notice .
  2. Install the 2 bolts securing the hood to each hinge.

    Tighten:  Tighten the hood-to-hinge bolts to 27 N.m (20 lb ft)  .

  3. Inspect the hood for proper alignment.
scientia non olet · About LEMON Manuals