LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Optra Base, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Daytime Running Lamp Control Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Daytime Running Lamp Module And Screws
    GM1256512Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the daytime running lamp module with the bolts.

    Tighten:  Tighten the daytime running lamp module bolts to 2 N.m (18 lb in)  .

  3. Install the instrument panel under cover.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals