LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Monte Carlo LS >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Cooler Replacement >> Installation Procedure

Installation Procedure

  1. Install the power steering cooler to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts to the power steering cooler.

    Tighten:  Tighten the retaining bolts to 14 N.m (124 lb in).

  3. Install the power steering cooler hoses.
  4. Bleed the power steering system. Refer to Bleeding the Power Steering System .
    5. Fig 1: Power Steering Cooler
    GM682324Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals