LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Malibu Maxx >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction) - 3.5L (Lx9) >> Repair Instructions >> Knock Sensor (KS) Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Disconnect the knock sensor wiring harness electrical connector.
    3. Fig 1: View Of Knock Sensors
    GM909629Courtesy of GENERAL MOTORS CORP.
  3. Remove the knock sensor.
scientia non olet · About LEMON Manuals